本文编写于 265 天前,最后修改于 240 天前,其中某些信息可能已经过时。
一、设置root密码
1.先选择从浏览器打开ssh连接服务器

2.切换到Root账号
sudo -i
3.设置root密码
passwd
然后会要求输入新密码,然后再重复一次密码,输入密码的时候不会显示出来,所以直接输入密码,然后回车,再然后重复输入密码回车

二、开启SSH权限
方法一
1.修改SSH配置文件/etc/ssh/sshd_config
vi /etc/ssh/sshd_config
2.然后再输”i”进入编辑模式
i
3.找到以下内容并修改
PermitRootLogin yes //默认为no,需要开启root用户访问改为yes
PasswordAuthentication yes //默认为no,改为yes开启密码登陆


4.修改完成后,再下按 esc 键,然后再输入:wq回车
:wq
5.重启SSH服务
service sshd restart
方法二
CentOS和Debian通用,输入以下两条命令
sed -i 's/PermitRootLogin no/PermitRootLogin yes/g' /etc/ssh/sshd_config
sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /etc/ssh/sshd_config
Ubuntu系统,输入以下两条命令
sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /etc/ssh/sshd_config
重启服务器
reboot
然后就可以正常的使用Putty、Finalshell、Xshell等工具正常连接了!